Rotary actuator for ball valve

Rotary actuator for ball valves

• Torque motor 2 Nm
• Nominal voltage AC/DC 24 V
• Control modulating 2...10 V

Product features

Mode of operation

The actuator is connected with a standard control signal of 0...10 V and drives to the position defined by the control signal.

Simple direct mounting

Simple direct mounting on the ball valve with only one screw. The mounting orientation in relation to the ball valve can be selected in 90° steps.

Manual override

Manual override possible with lever (the gearing is disengaged as long as the self-resetting lever is pressed).

High functional reliability

The actuator is overload protected and automatically stops when the end stop is reached.
The actuator switches off for seven seconds in the case of blocking, then attempts to restart. If the blocked condition persists, the actuator attempts to restart once every two minutes a total of 15 times and subsequently only once every two hours.