CO2, Temp & RH Monitor
Product Code: CO2M
PLEASE ENQUIRE FOR AVAILABILITY
Add To Favourites
The Flamefast Carbon Dioxide, Temperature and Relative Humidity Monitor provides a bold visual indication of air quality using our signature traffic light backlit display, as well as having a digital readout to display the current levels/concentrations.
CO2 levels are considered a good indication of general air quality, therefore can be used an indicator that any airborne contaminants are being removed.
With a built in mains rated volt free contact, the unit can be easily interfaced with Ventilation and Window Control Systems, as well as Gas Safety Systems. Or it can simply be used as a traffic light indicator to advise further ventilation is required.
The unit offer four pre-set programs, two aimed at ventilation and two aimed at gas safety. These affect the traffic light and relay setpoints.
Key Features
- 100 - 240V AC Power Supply
- Back plate can be pre-wired
- Clear digital readout
- Bold Traffic Light Indication
- Mains rated volt free contact output
- Typical 10 year life expectancy
- Self-calibrating CO2 sensor
- Mounts onto any standard single gang junction box or conduit box
- UK MANUFACTURED
Installer Selectable Options
- Audible Alarm (Enable/Disable)
- Backlight (Enable/Disable)
- Temperature Readout (Enable/Disable)
- Replace the CO2 PPM reading with "CO2"
The unit has four user selectable programmes to control the traffic light and volt free contact set points depending on the application.
| Program | 1 | 2 | 3 | 4 |
|---|---|---|---|---|
| Green - Yellow | 1,000 | 800 | 1,500 | 1,500 |
| Yellow - Red | 1,500 | 1,000 | 2,800 | 2,800 |
| Relay Position | N/O | N/O | N/C | N/C |
| Relay Set Point | 1,000 | 800 | 2,800 | 4,500 |
| Audible Alarm | 5,000 | 5,000 | 5,000 | 5,000 |
| Power Supply | 100-240V AC 50/60Hz |
|---|---|
| Power Consumption | 3W Max |
| VFC Output Rating | SPDT - 5A At 230V Max |
| CO2 Range | 0 - 10,000 Ppm |
| CO2 Accuracy | +/- 40 Ppm +3% At NTP |
| CO2 Display Resolution | 1ppm |
| CO2 Sensing Method | Non Dispersive Infra-red (NDIR) |
| CO2 Typical Sensor Life | 10+ Years |
| Temp Range | 0 - 50 DegC |
| Temp Accuracy | +/- 0.3°C At 25°C |
| Temp Display Resoltuion | 0.1 DegC |
| RH Range | 0 - 100% |
| RH Accuracy | +/- 2% At 20 - 80% |
| Operating Conditions | Temp 0-50 DegC - Humidity 0-95% (NC) |
| Sampling Method | Diffusion |
| Warm-up Time | 30 Seconds |
| Housing Material | Flame Retardant ABS |
| IP Rating | IP40 |
| Approval | CE |
| Height (mm) | 125 |
| Width (mm) | 86 |
| Depth (mm) | 36 |
| Warranty Period | 5 Years |
| UK Mainland | Order by 2pm for Next Day Delivery* |
|---|---|
| Under £25.00 | £4.50 |
| Over £25.00 | FREE |
| UK Highlands & Islands | Order by 2pm for Next Day Delivery* |
|---|---|
| Under £80.00 | £15.00 |
| Over £80.00 | FREE |