10mm RAS-B2 Dynamic radiator pack

You will have experienced complaints about uneven heat distribution, noise from the heating system and high energy bills. With Dynamic Valve, you can quickly and cost-effectively solve their issues. Indoor comfort will be greatly increased by the even heat distribution and faster startup times while noise in the heating system will be eliminated.

The energy efficiency increase and reliable system operation will reduce both energy consumption and the number of call outs. The result is a more efficient heating system with lower costs for everybody involved.

Features and benefits

• Even heat distribution increases comfort
• Energy consumption is lowered, reducing costs
• Condensing boilers run in condensing mode more often
• Lower risk of noise results in fewer callbacks

Danfoss RAS-B2 radiator valve is a pressure independent radiator valve, designed for use in 2-pipe heating systems. RAS-B2 dynamic valves are fitted with a flow limiting device for presetting of the maximum water flow.

The valves are available with maximum water flow of 10 - 135 l/h. RAS-B2 has a built-in pressure regulator, which keeps the differential pressure over the valve at a constant level of 0.1 bar, maintaining the set flow.

Dynamic valves are supplied with a protective cap, which can be used for manual regulation during the construction phase. The protective cap must not be used as manual shut off device. A special manual shut off device (code no. 013G5002) should be used.